For many crafters and tool users, a good air compressor is a key factor in ensuring the progress and quality of our work. tool in enhancing the longevity of our equipment and what we do and create with it.
Take replacing your compressor & # 39; s brushes for example, which is not as daunting as it may sound. This procedure is both simple and totally imperative to the vitality of your compressor. and the following few steps, you can replace the brushes in your compressor with perfect, professional ease.
This keeps you, as well as your compressor, more protected from injury or damage during repair.
It is also important to note that you must always replace your brushes in pairs. Regardless the good-looks of one brush, you must always replace both brushes as a set. Oh, and please do not underestimate the Read it, make it your friend, and bask in your new-found knowledge.
Okay. Now, to begin, you must first remove the compressor shroud, or the casing that contains the tool & # 39; s motor. To do this, simply unscrew the screws holding the thing together (these are usually set fairly deep into the shroud ) and pull the shroud apart separating it at its split down the middle. Set the shroud and screws as safely.
Very carefully move the spring next to the brushes, there will be one brush on each side brush lead terminal, or, the wire connector attached to each brush, of the brush you away from the brush ensuring you do not damage its springiness, get a hold of the first brush 's lead, and remove it from its holder.
Next, reconnect that brass terminal incorporating it attaches in the brush-holder in the same orientation the former was removed. same manner as prior to its disconnection.
Before you go rolling to the next job or project, though, reengage to compressor and give the thing a, Next, simply repeat the above steps with the second brush, carefully and securely replace the shroud. If the compressor does not run smoothly, remove the shroud once more and retrace your steps to make sure each you brush is making a proper connection. , it is best to quickly take your compressor to an authorized service center for a more thorough inspection.
